Rotary Encoder Series IAH Series

Inductive Bearingless Rotary Encoder

IAH Series — a bearingless, ultra-thin, non-contact inductive encoder with no optical parts or magnets. Ø70–Ø100 outer / Ø20–Ø50 hollow bore, built for lightweight, high-precision rotary control such as robot joints and servo motors. Supplied without a housing — rotor and stator only — for direct integration inside the machine.

INICS Inductive Bearingless Rotary Encoder (IAH Series) — rotor and stator ring type

Product Video

19 BIT
Absolute Resolution 524,288 pos/rev (Ø100 / Ø90)
±0.05°
Accuracy (Opt. ±0.01°) · Repeatability ±0.03°
10,000 RPM
Max. Speed · Absolute (Std. 4,000 / Opt. 10,000)
DC 5–24V
Wide-Range Power Supply · ≤100 mA (no load)

Key Features

FEATURE 01
Inductive Scanning Technology
A sensing method that reads rotary position by electromagnetic induction. With no optical parts or magnets it resists dust, oil and external magnetic fields, with a ≤60 µs update cycle and ±0.03° (±3σ) repeatability.
FEATURE 02
Ultra-Thin / Non-Contact / Lightweight / Bearingless
The bearingless rotor + stator design enables an ultra-thin, lightweight build (stator 7.7 mm, rotor 3.2 mm) with no mechanical wear for a long service life. Four hollow-shaft models — Ø100/Ø90/Ø80/Ø70 outer, Ø50/Ø40/Ø30/Ø20 bore — allow free routing of cables and shafts.
FEATURE 03
2 Output Types — Absolute / Incremental
Absolute: 10–19 bit resolution (max. 19 bit on Ø100/Ø90, 18 bit on Ø80/Ø70) specified at order, with rotation-direction and Binary/Gray (Gray: SSI only) options. Incremental: A · B · Z output from 2,000 to 32,768 PPR (max. 16,384 PPR on Ø80/Ø70), up to 3,000 rpm (Ø100/Ø90) / 3,800 rpm (Ø80/Ø70).
FEATURE 04
5 Output Interfaces
From RS-422 serial outputs — BiSS-C (CRC6), SSI (up to 2 MHz), UART (115,200 / 230,400 bps, CRC16) — to ABZ line-driver and NPN open-collector pulse outputs. Absolute outputs include E · W position-status bits. BiSS-C SSI UART ABZ Line Driver ABZ NPN

Structure · Bearingless Design

Bearingless · Rotor + Stator

Remove the Bearing — Thinner and Lighter

A fully separated design in which the rotor and stator are not mechanically linked. The rotor ring mounts on the shaft hub and the stator on the fixed part, with only a 1.25 ± 0.25 mm air gap and no contact at all between the two.

  • Zero mechanical wear — no contacting parts, so no wear-limited service life.
  • Ultra-thin / lightweight — no bearing housing; stator 7.7 mm and rotor 3.2 mm thick.
  • Hollow-shaft — cables, tubing and shafts pass through the Ø20–Ø50 bore.
  • Mounting flexibility — rotor and stator bolt (M2) directly to the machine; keep concentricity within 20 µm.
  • Rugged — 70 G shock, 5 G vibration, −10 to 70 °C operating (optional −40 to 80 °C). Open-frame (exposed PCB) construction; check the installation environment.