아이닉스 INICS 로고 - 홈으로

Sensor Series Non-Contact Switch

엘리베이터 비접촉 스위치 센서

Elevator Non-Contact Switch Sensor
아이닉스 엘리베이터 비접촉 스위치 센서 — 블루 알루미늄 프레임의 정사각 버튼 모듈 (INICS Elevator Non-Contact Switch Sensor)
비접촉 스위치 센서Touchless Switch Module
인천공항 엘리베이터에 설치된 아이닉스 비접촉 스위치 센서 — 층 버튼 옆 '비접촉식 버튼' 안내와 함께 실제 운용 중인 현장 (INICS non-contact switch sensor installed in an Incheon Airport elevator)
설치 현장 · 인천공항Field Install · Incheon Airport

엘리베이터 버튼을 직접 누르지 않고 손을 가까이 대는 것만으로 조작할 수 있는 비접촉 스위치 센서입니다. 비접촉 센서의 가장 큰 과제인 햇빛 등 외부 빛에 의한 오동작을 막는 기술로 특허등록을 마쳤고, 32비트 마이크로프로세서로 노이즈 오동작까지 차단합니다. 신규 엘리베이터는 물론 기존에 설치된 엘리베이터에도 적용할 수 있어 교체 없이 개선이 가능합니다. 보건소, KTX 역사, 공항, 동사무소 등 다중이용시설에 설치되어 현장에서 검증되었습니다.

A touchless switch sensor that operates elevator buttons by hand proximity alone. Patented sunlight-immunity technology and a 32-bit microprocessor block false triggers from ambient light and electrical noise. Retrofittable to existing elevators — no replacement required. Field-proven in public health centers, KTX stations, airports and community service centers.

32 BIT
마이크로프로세서 탑재
Microprocessor
UNTACT
손만 가까이 — 비접촉 조작
Touchless Operation
PATENT
외광 오동작 방지 특허등록
Sunlight Immunity
HALL·CAR
홀 버튼 · 내부 버튼 모두 설치
Both Button Types

Key Features · 제품 특징

FEATURE 01
32비트 마이크로프로세서
32-bit Microprocessor
32비트 MCU를 탑재해 각종 오동작 방지 기술을 구현했습니다. 감지 신호를 소프트웨어로 판별하기 때문에 단순 회로 방식보다 훨씬 안정적으로 동작합니다.
A 32-bit MCU runs the malfunction-prevention algorithms, judging every detection in software for far more stable operation than simple circuit designs.
FEATURE 02
외광 · 노이즈 오동작 방지
Sunlight & Noise Immunity
비접촉 센서의 가장 큰 과제인 햇빛 등 외부 빛에 의한 오동작을 막는 기술로 특허등록을 완료했습니다. 외부 노이즈에 의한 오동작 방지 기술도 내장되어 있습니다.
Patented technology defeats the biggest challenge of touchless sensors — false triggers from sunlight — with built-in immunity against external electrical noise as well.
FEATURE 03
기존 엘리베이터 설치 가능
Retrofit to Existing Elevators
신규 엘리베이터뿐 아니라 기존에 설치된 엘리베이터에도 적용할 수 있습니다. 엘리베이터 교체 없이 버튼만 비접촉으로 개선할 수 있습니다.
Fits new installations and existing elevators alike — upgrade the buttons to touchless without replacing the elevator itself.
FEATURE 04
홀 버튼 + 내부 버튼 설치
Hall & Car Buttons
층에서 호출하는 외부 홀 버튼과 탑승 후 층을 선택하는 내부(카) 버튼 모두에 설치할 수 있어 탑승 전 과정을 비접촉으로 완성합니다.
Installs on both hall call buttons and in-car floor buttons, making the entire ride touch-free from call to destination.

Technology · 감지 원리

Touchless + Ambient-Light Immune

누르지 않아도, 눌리다

Pressed Without Being Pressed

손이 버튼 면에 가까워지면 센서가 반사 신호로 접근을 감지해 접촉 없이 호출을 등록합니다. 특허받은 외광 차단 기술과 32비트 연산 처리로, 밝은 햇빛 아래에서도 노이즈 환경에서도 오동작 없이 동작합니다.

As a hand approaches the button face, the sensor detects it from the reflected signal and registers the call without any contact. Patented ambient-light rejection and 32-bit signal processing keep it working reliably in bright sunlight and in electrically noisy environments.

  • 비접촉 감지 — 손을 가까이 대는 것만으로 조작 신호가 등록됩니다. 물리적 접촉이 없어 위생적입니다. Touchless sensing — simply bringing a hand close registers the input. No physical contact, so it stays hygienic.
  • 외광 오동작 방지 · 특허등록 — 비접촉 센서의 최대 과제인 햇빛 등 외부 빛에 의한 오동작을 막습니다. Ambient-light immunity, patented — blocks false triggering from sunlight and other external light, the biggest challenge for touchless sensors.
  • 32비트 MCU 신호 처리 — 외부 노이즈에 의한 오동작을 마이크로프로세서가 판별해 걸러냅니다. 32-bit MCU signal processing — the microprocessor identifies and filters out noise-induced false triggers.
  • 신규 · 기존 겸용 — 교체 없이 기존 엘리베이터의 홀 버튼과 내부 버튼에 그대로 적용합니다. New and retrofit — applies directly to existing elevator hall and car buttons without replacement.